Design Your Carrier Tape

Live Preview

Your tape updates live as you design it in step 2. This is a draft to help you visualise — not a final specification.

Draft visual only · final dimensions, tolerances and pitch are confirmed by an EPS Global engineer. Capabilities vary by production site.

Drag to rotate · Scroll to zoom · Right-click to pan

Carrier Tape Parameters

Three quick steps — your drawing updates live as you go.

Already completed a drawing? View it here.

Enter the reference number from your confirmation email and the email address you used, and we'll bring your drawing back up.

Reference number

Email address

Your Details

Tell us who you are so we can send your drawing for approval. Your local EPS Global team will be in touch within one working day.

First name

Last name

Company

Work email

Phone number

Please use your corporate email address. By continuing, you agree to receive a follow-up from EPS Global about your enquiry. We won't share your details.

Tape Width (W)

* 8 mm is available but complex to tool — please discuss with our team. Widths of 32 mm and above use sprocket holes on both edges.

Pocket Dimensions (mm)

A0Pocket length (along feed) 22.00

B0Pocket width (across tape) 22.00

K0Pocket depth 3.50

Set by Standard

P0 4.00 mm sprocket pitch · P2 2.00 mm · E 1.75 mm edge-to-sprocket · D0 Ø1.50 mm · T 0.30 mm

Pocket pitch (P1) is set by EPS to suit your component and feeder — shown as a guide only.

Component Fit Guidance

For a reliable fit, the clearance between your component and the pocket should be 0.1–0.9 mm on each axis (length, width and depth). Example: a 21 mm component sits in a 21.1–21.9 mm pocket. A minimum of 1.9 mm of flat tape is needed each side of the pocket to seal the cover tape. Our engineers will fine-tune these for your part.

Project Details

A few last details help our engineers prepare your quote — all optional.

Part number (if known)

Project volumes

Expected start date

Your drawing is generated for visualisation. An EPS Global engineer will verify feasibility and confirm final dimensions.

Live Preview

Carrier Tape Drawing For Approval